Skip to content
Shopping in New York or New Jersey? Switch to our Long Island store →

How Much Baseboard Do I Need? A Simple Guide for Connecticut Homes

October 23, 2026

How Much Baseboard Do I Need? A Simple Guide for Connecticut Homes

THE PROJECT LIST / CONNECTICUT

Planning a room refresh in Windham or a larger Connecticut renovation? The first step is measuring the walls that actually need trim. Then allow for cuts and convert that total into full boards.

Here’s a practical way to estimate baseboard, using Bargain Moulding’s COL514 / BB514PRF, 9/16″ × 5¼″ primed baseboard in 16-foot lengths as the example.

Product-listing illustration of white COL514 baseboard around a blue-gray wall corner above an oak-colored floor.
COL514 application illustration from our product listing. Use the profile drawing and a sample to confirm the detail for your project.

THE QUICK FORMULA

Wall lengths − areas without baseboard
+ cutting allowance → round up to full boards

1. Measure every wall that gets baseboard

Write down each wall run, including short returns, bump-outs and closet walls if they are part of the job. For a simple rectangular room, multiply the length by two and the width by two, then add them together.

Example: A 12 × 14-foot bedroom has a perimeter of 52 feet: 12 + 14 + 12 + 14 = 52.

2. Subtract the sections where trim stops

Subtract the actual lengths that will not receive baseboard, such as door-and-casing interruptions or the footprint of permanent floor-level cabinets. Measure where the baseboard will stop; a nominal door width alone may not equal that distance. Include closets, alcoves and returns that do receive trim.

For our example, assume the doorway interrupts exactly 3 feet of the baseboard run. That leaves 52 − 3 = 49 feet of trim to install.

3. Allow for cuts and layout

A 10% allowance is a useful planning starting point for a straightforward room. Consider 15% or more when you have many corners, angled walls, short returns or a complicated cutting layout. A percentage is an estimate; check how your individual wall runs fit the available board lengths.

For the example room: 49 × 1.10 = 53.9 feet, or approximately 54 feet including the allowance.

4. Round up to full 16-foot boards

Divide your estimated footage, including the allowance, by 16. Always round up to a whole board, then review your cut list before ordering.

53.9 ÷ 16 = 3.37 → 4 boards.
Four 16-foot boards provide 64 linear feet. Check that the planned cuts cover each wall; keep useful offcuts for short sections and returns.

COL514 material costs in Connecticut

The regional listing checked on October 23, 2026 shows $14.08 per 16-foot board, equivalent to $0.88 per linear foot. The table uses full-board purchase quantities.

Planning examples — footage below already includes your chosen cutting allowance
Estimated footage 16-ft boards Footage purchased Baseboard cost
About 54 ft — bedroom example 4 64 ft $56.32
250 ft — example project total 16 256 ft $225.28
500 ft — example project total 32 512 ft $450.56

Baseboard material only. Tax, delivery, installation, paint, fasteners and other trim are not included. Prices and availability can change; confirm your regional cart or quote.

Get to know the COL514 profile

COL514 combines a broad flat lower face with a shaped upper edge. Before ordering, compare the profile drawing with your existing trim or a sample, especially if you are extending baseboard from another room.

COL514 baseboard profile drawing with a broad flat lower face and shaped upper edge.
The COL514 profile drawing shown on our website. Listed size: 9/16″ × 5¼″; board length: 16 feet. Drawing is not a measuring scale.

Before you place the order

  • Plan long runs first. Sixteen-foot boards can reduce joints, but allow for corner cuts and how you will transport and handle the material.
  • Check the transition to casing. Compare thickness, height and shape at your doorways before choosing the complete trim package.
  • Bring an offcut when matching. A clear profile photo helps; a physical sample gives the team more detail to compare.
  • Keep the order organized. Put baseboard, casing, shoe and doors on one material list so quantities and product choices can be reviewed together. Different products may have different profiles, primer shades and finishing requirements.

How much baseboard does a 1,200-square-foot home need?

There is no reliable single answer from square footage alone. Two homes with the same floor area can have very different numbers of rooms, closets, openings and wall returns. Measure the individual runs and use your cut list to build the order.

Does baseboard go behind cabinets?

Usually you exclude the footprint of permanent cabinets that meet the wall at floor level, but include exposed sides and returns where your design calls for trim. Confirm the layout before subtracting footage.

Bring the measurements. Build the list.

Shop COL514 for Connecticut, or email your room-by-room measurements, doorway interruptions and preferred store. We can help review the material list for an itemized quote.

Shop COL514 baseboard →

Email your project list

Planning a Windham pickup? Our Connecticut store is at 730 Windham Road, South Windham, CT 06266. Confirm stock and pickup arrangements with the team. If you need delivery, ask about eligibility, pricing and timing for your ZIP code.